Flexible, Affordable Electronics Education
Online courses and webinars for the printed circuit engineering community.

The PCB Design Process from Cradle to Grave

Speaker

Daniel J. Smith
Raytheon SAS

Duration
 2min 57sec

This half-day course is an overview (past, present, and future) of the interactions of processes, people and technologies involved in the complete lifecycle of a PCB design. This course is designed to provide a solid foundation for those who are just starting out (zero to two years of experience) as a PCB designer and help the individual formulate a roadmap to build their knowledge base for both personal and career advancement as contributors to this industry. All attendees will receive an MS Excel checklist of the traditional questions that PCB designers should ask throughout the PCB design process.

Recommended Audience:
Speaker  :  
Doug Brooks and Dr. Johannes Adam
Stop thinking about current density! In this 30-minute video, Doug Brooks and Dr. Johannes Adam explain the material parameters and properties that determine the temperature of a trace, how these...
Speaker  :  
Robert Carter
Company : 
Oak-Mitsui Technologies
Large data transmission continues to increase annually due to live video streaming, cloud storage, PDA usage, IOT, and other technologies. Electronic devices are getting smaller yet required to...
Speaker  :  
Rick Hartley
Company : 
RHartley Enterprises
Circuit boards for the IoT world (Internet of Things) are often driven by the need for low power dissipation, low cost (which drives very low layer count), moderate to high-density and mixed-signal...
Speaker  :  
Atar Mittal
Company : 
Sierra Circuits
Signal degradation on PCB transmission lines manifests in many forms: undershoot, overshoot, ringing, pulse shape distortion, switching noise, attenuation, ground bounce, skew, etc. All these can be...
Speaker  :  
Rick Hartley
Company : 
RHartley Enterprises
Differential pairs have been used in PC boards for years to carry high-speed serial and high-speed parallel data, in a variety of bus formats. Many board designers and engineers believe the rules...
This comprehensive seminar of how to design a PCB stackup to optimize performance while attaining the lowest cost possible. With the advent of very high-speed signaling along with multiple very...
Speaker  :  
Rick Hartley
Company : 
RHartley Enterprises
This session is intended for board designers to understand the things RF engineers request during PCB layout. Experienced RF engineers will likely not learn anything new from this course, as the...
Speaker  :  
Keven Coates,
Company : 
Geospace Technologies
What is a wire? At high speeds, it behaves very differently from what we were taught in college. This presentation on high-speed basics makes the subject intuitive in a way that’s easily understood....
Speaker  :  
Ralf Bruening
Company : 
Zuken
Supply voltages decrease with every new silicon generation, contributing as well to the goal of reducing power consumption of our electronics. Coupled with the resulting shrinking noise margins for...
Speaker  :  
Dan Beeker
Company : 
NXP Semiconductor
This presentation will present a simple EM physics and geometry-based approach to designing power distribution networks on PCBs. From input power connection to the IC die, the simple rules discussed...
Speaker  :  
Rick Hartley
Company : 
RHartley Enterprises
When time-varying (AC) signals travel in the transmission lines of a board, state-changing electric and magnetic fields are present. These fields, when not controlled, are the source of noise and...
Speaker  :  
Keven Coates
Company : 
Geospace Technologies
How do you design a high-speed digital circuit with enough bypass caps in the right area to supply all the peak power demands? You can’t listen to all the expert advice because it seems they can’t...
Speaker  :  
Jamie Pacamarra
Company : 
Analog Devices
Skill Level : 
Audience: 
When signals start to get affected by the physical characteristics of the PCB, things start to get a little tricky. A simple point-to-point connection won’t be enough to keep the integrity of the...
Speaker  :  
John Coonrod
Company : 
Rogers Corp.
Understanding millimeter-wave (mmWave) concepts can benefit RF designers, high-speed digital circuit designers and fabricators. In the RF industry, as frequency increases many circuit properties...
Speaker  :  
Daniel Beeker
Company : 
NXP Semiconductor
The material presented will be focused on the physics of electromagnetic energy basic principles, presented in easy-to-understand language with plenty of diagrams. Attendees will discover how...
Speaker  :  
Eric Bogatin
Company : 
Teledyne LeCroy
A differential pair is any two transmission lines. When each transmission line has a return plane, its pretty clear how the differential impedance is related to the geometry. But what if there is no...
Speaker  :  
Bill Hargin
Company : 
Z-zero
The objective of this tutorial is to guide design teams through the process of evaluating and selecting the right laminate for a design, creating PCB stackups that meet the requirements of complex,...
Speaker  :  
Rick Hartley
Company : 
RHartley Enterprises
As most engineers and designers are aware, EMI occurs because some mechanical structure, within or attached to our system, is capable of resonating and radiating electromagnetic field energy. Those...
Speaker  :  
Keven Coates
Company : 
Geospace Technologies
Have you ever had a noise-sensitive circuit and tried to find the noise source? Even after you completely encased sensitive portions in all sorts of shielding, you still had noise? It’s very...
Speaker  :  
Daniel Beeker
Company : 
NXP Semiconductor
Raise the shields, Scotty! Starting with some simple definitions for ESD/EOS, this session describes the important differences in the energy involved and the type of damage that can result. The...
Speaker  :  
Daniel Beeker
Company : 
NXP Semiconductor
A step-by-step guideline for determining the PCB design requirements based on device energy consumption requirements. Wave cycle times and transmission line capacity form the basis of this...
Speaker  :  
Rick Hartley
Company : 
RHartley Enterprises
Power distribution in PCBs is the foundation around which all things work in the circuit. If this is not designed correctly, the entire circuit is at risk from noise and signal integrity issues, to...
Speaker  :  
Eric Bogatin
Company : 
Teledyne LeCroy
Some experts say you should never use a split ground plane. Others say you should use a split ground plane to control noise. When is the right time to split a ground plane? We will explore the...
Speaker  :  
Daniel Beeker
Company : 
NXP Semiconductor
Tired of failing EMC certification over and over? Join the crowd. Shrinking IC geometries and a resulting increase in switching speeds make designing compliant printed circuit boards more...
With the advent of ICs with multiple power rails at very high currents, the design of the power delivery system in a modern product is often more difficult than routing the PCB to ensure good signal...

Printed Circuit University offers Flexible, Affordable Electronics Education. We offer online classes from some the top professionals in their fields

Don't have an account yet? Register Now!

Sign in to your account